Directions to replace a lost filling:

• Wash the cavity area with warm water and do not dry.
• Cut with spade tool or pinch a small amount of Temparin Max from the vial, and roll into a ball between fingers.
• Slightly overfill the cavity with Temparin Max and tap into place with applicator tool tip.
• Close your teeth together, as if you were biting down on a piece of paper, and gently chew or grind on the replace filing a couple times to create a comfortable bite.
• Use a moist cotton swab to remove excess Temparin Max from around the area.
• Moisture will accelerate the set.
• Temparin Max will set softly in your mouth within a few minutes, but avoid chewing on the repair for 2-3 hours to allow the material to fully set.

Directions to secure loose crowns, caps or inlays:

• Try the crown, cap or inlay first to see if you can fit it accurately back onto the tooth surface.
• If you are not able to do so, or if remaining tooth is cracked, then do not proceed further.
• If the crown has a post attached to it or if there is tooth surface remaining inside the crown, Temparin Max may not adhere.
• Carefully rinse the tooth area and the inside of the crown, cap or inlay with warm water, and do not dry.
• Cut with spade tool or pinch a small amount of Temparin Max from the vial, roll into a ball between fingers and place evenly inside the crown, cap or inlay.
• Place the crown, cap or inlay on the tooth and bite down, applying pressure to push into position.
• Temparin Max will begin to harden within a few minutes, but avoid chewing on the repair for at least 2-3 hours to allow the material to set.
• Use a toothbrush to gently clear any excess material from around the crown, cap or inlay